|
| |
Standard Features of
Marine Motors
Mechanical
- totally enclosed fan cooled
- explosion proof
- non-ventilated
- drip-proof guarded
- C, D and P flange mountings
- cast iron frame, end brackets and conduit box (cast nodular
iron optional)
- conduit boxes are gasketed, diagonally split and rotatable
in 90° steps
- standard high strength, zinc plated hardware
- street elbow type breather drain (TEFC), Crouse Hinds HP
type breather drains
- bearings are double shielded, regreasable, single row
width, deep groove Conrad type made from improved
steel for longer life expectancy
- bearings are filled with grease for ambient temperatures of
-40°C to + 40°C
- bearing housing is packed with grease at time of motor
assembly
- frames 444T - 449T for belted service use a roller bearing
on drive end
- epoxy paint finish
Electrical
- class F, non-hygroscopic system
- total of three immersion and bakes on wound stator of
chemically resistant varnish
- 1.15 or 1.00 Service Factor as required
- multi-speed designs
- design B (standard) C or D as required
Click
here to request
a motor quotation on line
|
